Resin Bound Gravel Driveways & Patios
Graded aggregates bound with a clear polyurethane resin binder, which allows the aggregate colour to show through. A perfect and beautiful solution for your driveway, path or patio.
Greenwood surfacing’s resin bound system is comprised of graded aggregates bound with a clear polyurethane resin binder, which allows the aggregate colour to show through.
- Driveways and paths
- Car parks
- Cycle ways
- Landscape schemes
- Access roads
- Swimming pools
The durability of resin bound surfacing will depend on site conditions and it is anticipated that the surface will have a similar service life to that of the conventional bituminous macadam made with the same aggregate.
Sustainable urban drainage system (SUDS).
The environmental agency has recognised the need to manage water run off from hard surfacing. Our resin bound surfacing system is permeable and if laid onto a permeable surface such as open textured macadam, it will prevent standing water and encourage rapid drainage to the underlying ground.
Specifying Greenwood’s resin bound surfacing system will demonstrate to planning authorities implementation of a sustainable drainage system.
Communal parking area.
In front of the University lecture theatre.
Perfectly coloured resin driveway working well against the colours of this property
Terrace house in Bristol with new resin driveway
Silver granite driveway.
Amber resin with block surround.
New build resin driveway.
Silver & black fleck resin driveway with black block surround.
Cotswold village driveway.
Cobble & resin combination.
Bristol bungalow with new resin driveway
Tree pits allow rainwater to permeate through to the tree roots.
Large Bristol driveway surfaced in resin with appropriate drainage at drive parameter
Resin driveway at Somerset farmhouse
Resin driveway with block surround
Resin pathway applied between existing surfaces
Resin surface applied around based of slabbed steps
Semi detatched Bristol home with new resin drive
Riverside pedestrian walkway.
Now tidy rear courtyard.
Non-slip pool surround.
Bristol driveway inset pattern being filled with different colour resin
These samples illustrate a small selection of our complete range. To help you choose a colour we would advise finding a sample that complements your property, (this is usually a good starting point). We can then come up with a few colour variations to help pin down the final choice.
Dursley Cobbles and Resin Patio and Paths
The access to this job was very difficult indeed. As you will see in the gallery images, the concrete patio base was specially pumped...Read more
Shared Access Driveway in Resin and Blocks
The original Tarmac leading up to the property was in bad shape, so we cut out the damaged areas and replaced with new Tarmac...Read more
Beautiful Resin Driveway with a Block Surround
The garden to the right side of the existing driveway was excavated to create parking for an additional car. A new base layer of...Read more
Bristol Red Brick Home with Matching Resin Drive
The garden was excavated to create room for another car. A red tone complimentary coloured edging stone was laid around the perimeter. The kerbs...Read more
New Driveway for Traditional Somerset Farmhouse
This traditional Somerset farmhouse had a concrete access road and farmyard for the last 50 years. We removed all of the old concrete surface...Read more
New Blocking Paving & Resin Driveway for Tetbury Property
We used block paving to break up the expanse of resin surface around this Tetbury based property. The blocks were used around the rear door...Read more
The Design Possibilities are Endless
This case study of a domestic footpath shows how we were able to interpret our clients carp logo idea. The stencil was not easy...Read more
Our Daughter is Getting Married in June
“Our daughter is getting married in June, is there anything you can do to tidy up our existing tarmac drive?” asked one client who...Read more